EN 10216-2 1.0425 P265GH Seamless Steel Tubes

Short Description:

EN 10216-2 P265GH Seamless steel tubes Standard:EN 10216-2 Seamless steel tubes for pressure purposes Technical delivery conditions Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties EN 10216-2 P265GH Sea

Product Detail

Product Tags


EN 10216-2 P265GH Seamless steel tubes
 
Standard:EN 10216-2
Seamless steel tubes for pressure purposes —Technical delivery conditions
Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
 
EN 10216-2 P265GH Seamless steel tubes for pressure purposes
 
 
EN 10216-2 P265GH Seamless steel tubes Quick Details
Manufacture:Seamless process
Wall thickness(WT): 2.1mm——20 mm.
Outer diameter (OD): 21 mm——509mm
Length: 6M or specified length as required.
Ends: Plain End, Beveled End, Treaded
 
Additional Info
Port of Shipment: Tianjin, China
Payment Terms:T / T, LC
Delivery: 7-15 days after payment
Surface: Tubes will be varnished (Outside only) to prevent rust.
Marking: Standard + Steel Grade + Size + Heat No + Lot No
Package: Bundles (hexagonal),Wooden Boxes,Crates (steel/wooden) or as required
 
 
The steel name of non-alloy steel grades
(1)The capital letter P for pressure purposes;
(2)The symbols GH for elevated temperature.
 
 
MANUFACTURING PROCESS
(1)Steel making process
Steels shall be fully killed.
(2)Tube manufacture and delivery conditions
The tubes shall be manufactured by a seamless process.
The tubes can be either hot or cold finished.
 

EN 10216-2 P265GH Seamless steel tubes shall be supplied in the relevant heat treatment conditions as specified in Table 1.
 

Steel grade Heat
treatment
a		 Austenizing Tempering
Steel
name		 Steel
number		 Temperature °C Cooling
Medium		 Temperature °C Cooling
medium
P265GH 1.0425 +N b 880 to 940 Air - -
a  +N = Normalising, +NT = Normalising + Tempering, +QT = Quenching + Tempering (air or liquid), +I = Isothermal Annealing.
b  Normalising includes Normalising Forming.
 
 
Chemical composition of EN 10216-2 P265GH
Steel grade Steel
number		 C Si Mn P max S max Cr Mo Ni
P265GH 1.0425 ≤ 0,20 ≤ 0,40 ≤ 1,40 0,025 0,020 ≤ 0,30 ≤ 0,08 ≤ 0,30
 
Al tot Cu Nb Timax V Cr+Cu+Mo+Ni Others
≥ 0,020 b ≤ 0,30 c ≤ 0,010 d 0,040 ≤ 0,02  ≤ 0,70 -
 
 
Mechanical properties of EN 10216-2 P265GH
Steel grade Upper yield strength or proof strength
R eH or Rp 0,2 for Wall Thickness T
min.		 Tensile
Strength
Rm		 Elongation
A min.
% a
Steel name Steel
number		 T ≤ 16 16 < T ≤ 40 40 < T ≤ 60 60 < T ≤ 100 l t
MPa * MPa * MPa * MPa * MPa *
P265GH 1.0425 265 255 245 - 410 to 570 23 21
Note:l = longitudinal t = transverse
 
 
Dimensions tolerances of EN 10216-2
 
Tolerances on outside diameter and wall thicknes
Outside Diameter D mm Tolerances on
D		 Tolerances on T for a T/D ratio
    ≤ 0,025 > 0,025
≤ 0,050		 > 0,050
≤ 0,10		 > 0,10
D ≤ 219,1 ± 1% or ± 0.5mm  
whichever is the greater		 ± 12,5% or ± 0.4mm whichever is the greater
D > 219,1 ± 20% ± 15% ± 12,5% ± 10% a
a For outside diameters D ≥ 355,6 mm it is permitted to exceed the upper wall thickness locally by a further 5% of the wall thickness T
 

Tolerances on inside diameter and wall thickness
Tolerances on inside diameter Tolerances on T for a T/d ratio
d d min ≤ 0,03 > 0,03
≤ 0,06		 > 0,06
≤ 0,12		 > 0,12
± 1% or ± 2 mm whichever is the greater (+ 2% ,0)or (+ 4 mm,0)
 		 whichever is the greater ± 20% ± 15% ± 12,5% ± 10% a
a For outside diameters D ≥ 355,6 mm it is permitted to exceed the upper wall thickness locally by a further 5% of the wall thickness T
 
 
Tolerances on outside diameter and minimum wall thickness
Outside diameter D mm Tolerances on D Tolerances on T min for a T min /D ratio
≤ 0,02 > 0,02
≤ 0,04		 > 0,04
≤ 0,09		 > 0,09
D ≤ 219,1 ± 1% or ± 0.5mm
whichever is the greater		 (+ 28%,0) or (+ 0.8 mm,0) whichever is the greater
D > 219,1 + 50%
0		 + 35%
0		 + 28%
0		 + 22% a
0
a For outside diameters D ≥ 355,6 mm it is permitted to exceed the upper wall thickness locally by a further 5% of the wall thickness T
 
 
Tolerances on inside diameter and minimum wall thickness
Tolerances
on inside diameter		 Tolerances on T min for a
T min /d ratio
d d min ≤ 0,05 > 0,05
≤ 0,1		 > 0,1
± 1% or ± 2 mm
whichever is the greater		 (+2%,0) or (+ 4 mm,0) whichever is the greater + 35%
0		 + 28%
0		 + 22% a
0
a For outside diameters D ≥ 355,6 mm it is permitted to exceed the upper wall thickness locally by a further 5% of the wall thickness T
 
 
Tolerances on exact lengths
Dimension in mm
 
Length L Tolerance on exact length
L ≤ 6000 +10
0
6000 < L ≤ 12 000 +15
0
L > 12 000 + by agreement
0
 

TESTINGS
(1)Chemical analysis
(2)Tensile test(Tensile test at room temperature, Tensile test at elevated temperature)
(3)Flattening test
(4)Ring tensile test
(5)Drift expanding test
(6)Ring expanding test
(7)Impact test
(8)Leak tightness test(Hydrostatic test,  Electromagnetic test)
(9)Dimensional inspection
(10) Visual examination
(11) Non-destructive testing
 
 
MARKING
Marking to be applied
The marking shall be indelibly marked on each tube at least at one end. For tubes with outside diameter D ≤ 51 mm the marking on tubes may be replaced by the marking on a label attached to the bundle or box.
 
 
PROTECTION
The tubes will be delivered with A temporary protective coating or durable coating and/or lining
 
 
 
Ordering Information
Mandatory information
a) the quantity (mass or total length or number);
b) the term "tube";
c) the dimensions ;
d) the designation of the steel grade in accordance with this Part of EN 10216 ;
e) the test category for non-alloy steel .
 
 
Options
1) Cold finishing.
2) Restriction on copper and tin content.
3) Product analysis.
4) Impact testing .
5) Longitudinal impact testing at -10° C for non-alloy steel grades.
6) Tensile testing at elevated temperature .

Please fill the following form.
Send

Products categories

  • field:title/]

    EN10216-2 1.6368 15NiCuMoNb5-6-

  • field:title/]

    EN 10216-2 1.7380 10CrMo9-10 Se

  • field:title/]

    EN 10216-2 1.7335 13CrMo4-5 Sea

  • field:title/]

    EN 10216-2 1.7338 10CrMo5-5 Sea

  • field:title/]

    EN 10216-2 1.5415 16Mo3 Seamles

  • field:title/]

    EN 10216-2 1.0425 P265GH Seamle

  • field:title/]

    EN 10216-2 1.0345 P235GH Seamle

  • field:title/]

    EN 10216-2 1.0348 P195GH Seamle